Controls
order now at amazon.com Download This Document

One-Touch Leveling LED Control

Lectrotab is excited to introduce a new control incorporating features requested by boat owners to provide a user friendly control for a more enjoyable boating experience.

  • One-Touch button to raise/lower tabs
  • Automatic tab position return
  • Completely sealed and waterproof
 one-touch leveling led control
FEATURES
  • Microprocessor based trim tab control with LED tab position indicators
  • Single button press to move both tabs up or down simultaneously
  • Direct replacement for Oval LED (SETR-61) controls
  • Automatic return to last tab position if ignition key is turned off and back on again
  • Completely sealed, completely waterproof and will not deteriorate in sunlight
  • Automatic tab retraction and calibration with key or accessory switch off
  • Easy upgrade from rocker switch style control
  • No external power module required for single or dual actuator per tab systems
  • LED tab position indicators dim automatically in darkness and brighten in sunlight
  • Adjustable programming features located on back of specification sheet
  • Operates on 12 or 24 volt dc systems
SPECIFICATIONS
Model Number Display Color Number of Stations / Actuators Overall Width Overall Height / Thickness Mounting Hole Cutout (Diameter) DC Voltage Fuse Size Power Input (1 Actuator per Tab) Fuse Size AUX Terminal (MUST CONNECT)
SLC-11 Black 1 or 2 Stations / 1 or 2 Actuators/tab 3.0" / 77mm 3.0" (77mm) / 437" (11mm) 2.25" (57mm) to 2.5" (64mm) 12/24 12vdc = 15 or 20 amp
24 vdc = 10amp 		1 to 2 amp
order now at amazon.com
SLC WIRING and DIMENSIONS
slc-11 programming
SLC PROGRAMMING
  Program Mode Sequence  
Setting Enter Change Setting Exit and Save Range Default Program Details
Timing Port Bow Down Press and hold Stbd. Bow Up/Down Port Bow Up 4 - 12 seconds 8 sec. 8 LED's = 8 second actuator
4 LED's = 4 second actuator
Swap LEDs Starboard Bow Down Stbd. Bow Up/Down Port Bow Up LEDs opposite or same side as button press LEDs opposite 1 LED each side = LEDs opposite button press / 8 LEDS each side = same side
Remember last tab setting Port Bow Up Stbd. Bow Up/Down Port Bow Up Standard retract / Remember last tab setting Standard 8 LEDs each side = Standard / 1 LED each side = Remember last tab setting
Disable Auto Tab Retract All Up and All Down Simultaneously for 2 seconds or longer Stbd. Bow Up/Down Port Bow Up Enable / Disable Enable 1 LED each side = Auto Tab Retract Enable / 8 LEDs each side = Auto Tab Retract Disable

Enter, Adjust and Exit Program Mode:

  • Before entering program mode, 12vdc or 24vdc must be applied to Oval main power
  • Power to AUX terminal must be OFF (Aux is typically connected to ignition key switch or aux switch)
  • Press and hold button noted in Programming chart under column “Enter” for more than 2 seconds while switching the Aux terminal switch to ON at the same time
  • Release the “Enter” button and press “STBD BOW UP or DOWN” button to change the value
  • Press and hold “PORT BOW UP” for more than 2 seconds to exit program mode